Bluetooth Portable animal ear tag RFID reader FDX & HDX instruction
Instruction
BLE01 Ear Tag Reader provides basic RFID reader functions of reading, displaying, and transmitting via Bluetooth module.
This manual is intended to provide a through overview of the BLE01 Reader and should be carefully read before starting operating the device.
Thank you for your trust in us to provide for your Ear Tag Reader needs.
Features
1.Intended Use
Animal Identification and Tracking Management
2.Physical characteristics
Size of reading head:φ50mm
Size of length: 45cm to 120cm
Weight: ≤0.3kg
Screen: 2.08inches
3.Environmental
Operating Temperature Range: -10 to 50 °C
Storage Temperature Range: -20 to 65 °C
Humidity Max: 90%
4.Electronic
Battery Capacity:3000mAh
continuous working time:20hours
Communication mode: Bluetooth
Frequency: 134.2 KHz
Reading range: 5-8CM
Waterproof of reading head: IP57
Compatible with the ISO Standards 11784 and 11785, with FDX-B and HDX capability
Getting Started
FOR YOUR PROTECTION, please read these safety instructions completely before applying power to, or operating the system.
Unpacking
The BLE01Ear Tag Reader is carefully packed to prevent damage during shipment. Before unpacking, please note any visible damage to the outside of the shipping containers.
Items should be checked in order to ensure that all ordered items have been received. The following table lists the items which should be received with each particular system.
| ITEMS |
INCLUDED |
| BLE01Ear Tag Reader |
√ |
| USB Cable for Charging |
√ |
| BLE01Ear Tag Reader Operators' Manual |
√ |
Each item should be examined for any noticeable defects or damage that may have occurred during shipment although it is packed carefully. If any defect or damage exists, please contact to your local representative immediately to report the problem.
Key Board Functions
The handheld keyboard is multifunctional. In different modes, it has different functions.
1---Set button
2--- Enter button
3--Power/Scan button
Power/scan
Press the 'Power/Scan' button to power up the reader, the version of the software will be showed on the screen. Seconds after the reader turned on, the reader begins to scan.
The reader can be turned off by hold down the 'Power/Scan' button for seconds.
You can scan by pressing the 'Power/Scan' button and quit the scanning operation by pressing the 'Enter' button.
The device will shut down automatically in 15minutes, if you don't use it.
General Setting
Press the 'Set' button to enter the menu setting interface, there are 4 options you can choose (form 1). Press the 'Enter' button to choose the option (mark >), press the 'Enter' button to enter. Press the 'Power/Scan' button to return to the previous menu.
Form 1 menu setting
| |
Option |
Description |
| 1 |
language |
The only choice is English, now. |
| 2 |
Bluetooth |
There are 3modes,'EMU KEB STD', 'EMU KBD SMART' and 'BLE PERIPHERAL'. You can press 'Set' button to select a mode, then press 'Enter' button to choose the mode (the device will indicate you 'waiting…' for set the parameter), at last there is a mark'*'before the current mode. |
| 3 |
About |
Show the device information, including the SN and the version of the soft. |
| 4 |
Shut down |
Press the 'Enter' button to power off the device. |
Notes for Bluetooth:
- EMU KEB STD mode: shown the data from the reader and the cursor will jump to the next line.
- EMU KEB SMART mode: besides the functions of the EMU KEB STD, the keyboard will pop automatically for operator to add information.
- BLE PERIPHERAL mode: reserved for APP connection
|
Bluetooth connection
You can choose any equipment which has Bluetooth and Virtual keyboard (like Notes, excel, word etc) functions as your mobile terminal, like iPhone, ipad etc.
Open the Bluetooth function of the mobile terminal, and then connect our device 'Ear Tag Reader'.
Open the notes (for example), create a new or open an existing note, the blinking cursor notice that the equipment is ready for receiving data from the reader.
Scanning
- Press the 'Power/Scan' button to detect (see figure4-1).
- If there is no tag detected in 20 seconds, the information 'NO Tag' and' press the Power/Scan button to scan' will be shown on the screen(see figure 4-2). You can press the 'Power/Scan' button to detect again.
- If a tag is detected, the tag number will be shown on the screen (see figure 4-3).
- If the Bluetooth connection is well, the tag number will transmit to the mobile terminal automatically (see figure 4-4)
Maintain
1.Charging
When battery goes down, it is necessary to recharge the reader. Unscrew the back cover, and then connect the USB Charger and USB Cable with the reader to charge the reader as shown in figure 5-1. When in charging, the battery indicator light will be green.
To see the status of charging, you should turn on the reader.
If the battery indicator bars all light and the flash sign not blinking means the battery is fully charged. Unplug the USB cable and screw the back over.
2.Cleaning
Periodic cleaning of the reader is required. The reader can be cleaned by soft cloth or paper or water directly at the reading header. The reader with the waterproof level of IPX7 can be washed using clean water.
3.Storage
When not in use, it is recommended that the equipment should be put in the case. While stored the equipment should be protected from temperature extremes.
4.Maintenance
- The BLE01 Ear Tag Reader needs to be taken good care of during or after use.
- Do NOT drop it from high level.
- Prevent high pressure from the screen.
- Regularly charge the battery.
Company information
Shenzhen A. N. G Technology Co., Ltd.
ANG is member of ICMA (International Card Manufacturer Association) and delivers outstanding quality that has been certified in accordance with CE FCC and RoHS certificates.
Our Business Scales: PVC Card, Magnetic Stripe Card, RFID /NFC Card, Tag and Reader, BioPVC
To make sure NFC Sticker can be delivered without any damage, ANG uses top standard packaging. All Paper boxes and cartons are made of high-quality material.
Packing details depend on the dimension of the NFC sticker.
If you're interested, just send me a inquire below !!! We will reply within 24 hours.Have a good day:)
Audited Supplier 
){kind=link}