UHF rfid athlete tags to receive accurate finishing times for marathon racing
In order to receive accurate finishing times it is essential to have the pro trainer tag correctly fitted. Please note the tag must be round and not flattened in anyway. Failure to attach the pro trainer tag correctly could result in you not receiving any finish times.
Check your pro timing chip and make sure that it matches your race number.
Our timing chip for running is provided on a self adhesive water proof strap. This timing chip will be supplied with your race number it will be supplied printed with your number. The number should match your race number. Using RFID (Radio Frequency Identification) technology to precisely track runners' finishing times became commonplace in 1993 when Champion-Chip released their shoe mounted chip. The system worked, but the chips were fairly expensive to replace. To address this problem, in 2007 ChronoTrack made race timing more affordable and convenient than ever before when they released their disposable RFID chips that could be easily attached to shoe laces. The system quickly gained popularity and has since become the gold standard for race timing.
Product introduction:
| Frequency |
860-960MHZ |
| Standard |
EPC GEN2 18000-6C |
| Size |
255 x 25mm |
| Outer material |
Synthetic Paper |
| INLAY |
Alien H3, 9654 |
| INLAY Material |
PET+AL |
| Chip |
H3 or Impinj |
| User memory |
512bit |
| Operation model |
Read/write |
| Reading distance |
Around 3meter( related with the reader and surroundings) |
| Life |
One Hundred Thousand Times |
| Operating Temp |
-20ºC~50ºC |
| Storage Temp |
-40ºC~80ºC |
Applications of RFID athlete tags
RFID tag is necessary part in intelligent sports competition, for example marathon.
RFID technology used in RFID can save some manpower, meanwhile can reduce error and make more the fairness and accuracy of the fair for competitor.
Before start competition, fix the tag on the shoes. Then when running go through the
antenna, the reader can get the information from the tag, such as name, team number
etc. whit time of the instant.
How to use?
Step 1 & 2
Take the strap and thread through a single lace with the logo and your race number facing outwards as illustrated below.
Step 3
Peel the 3M sticker of and Stick the 2 tabs together using the blue square as a guide ensuring that you have created a loop.
Step 4
Rotate the strap so your race number is visible from the front and the Blue Square part of the timing chip is against your trainer. The pro trainer tag should now be attached forming a loop through the shoe lace with the race number and logo facing upwards you can tighten your laces to ensure the tag does not rotate around.
YOU MUST ENSURE THAT YOUR TIMING CHIP FORMS A LOOP. IF YOU FLATTEN YOUR TIMING CHIP IN ANYWAY YOU WILL REDUCE THE EFFECTIVENESS OF THE CHIP AND MAY NOT GET ANY READS. THE MOST COMMON ISSUE WE GET WITH TIMES ARE PEOPLE NOT FOLLOWING THE INSTRUCTIONS OR NOT BOTHERING TO READ THEM.
About us:
1.We are a manufacturer, the price, quality and delivery time are all controlled by ourselves.
2.Low MOQ offered, we accept sample order as a test order.
3.Many years' experience on producing these products.
4.Can produce any products by designing a new mold.
5.Offer you very affordable price, and fulfill your all specific needs.
6.Factory manufacture high quality Low Cost 13.56MHz Custom Printed Rewritable RFID NFC Tag Label Sticker
Audited Supplier 
){kind=link}
){kind=link}