Animal Management Portable RFID Reader FDX-B & HDX Instruction

• Type: ID Card Reader
• Card Type: HID, EM, Hitag S
• Interface: USB, Bluetooth
• Reading Distance: 1-5m
• Application: Farm
• Type Name: RFID Reader
• Model NO.: RFID reader
• Chip: Fdx-B and Hdx
• Battery Capacity: 3000mAh
• Continuous Working Time: 20hours
• Communication Mode: Bluetooth
• Frequency: 134.2 kHz
• Reading Range: 5-8cm
• Waterproof of Reading Head: IP57
• ISO Standards: 11784 and 11785
• Humidity Max: 90%
• Transport Package: Individual Poly Bag, Shrink Wrap, Export Carton
• Specification: Size of length: 45cm to 120cm
• Trademark: ANG
• Origin: Shenzhen
• HS Code: 8471900090
• Production Capacity: 100000

Product Description

Animal Management Portable RFID Reader FDX-B & HDX Instruction

Instruction
 

BLE01 Ear Tag Reader provides basic RFID reader functions of reading, displaying, and transmitting via Bluetooth module.
This manual is intended to provide a through overview of the BLE01 Reader and should be carefully read before starting operating the device.
Thank you for your trust in us to provide for your Ear Tag Reader needs.


Features

1.Intended Use	Animal Identification and Tracking Management
2.Physical characteristics	Size of reading head:φ50mm Size of length: 45cm to 120cm Weight: ≤0.3kg Screen: 2.08inches
3.Environmental	Operating Temperature Range:  -10 to 50 °C Storage Temperature Range:  -20 to 65 °C Humidity Max:  90%
4.Electronic	Battery Capacity:3000mAh continuous working time:20hours Communication mode: Bluetooth Frequency: 134.2 KHz Reading range: 5-8CM Waterproof of reading head: IP57 Compatible with the ISO Standards 11784 and 11785, with FDX-B and HDX capability

 

Getting Started

FOR YOUR PROTECTION, please read these safety instructions completely before applying power to, or operating the system.

Unpacking
The BLE01Ear Tag Reader is carefully packed to prevent damage during shipment. Before unpacking, please note any visible damage to the outside of the shipping containers.

Items should be checked in order to ensure that all ordered items have been received. The following table lists the items which should be received with each particular system.
 

ITEMS	INCLUDED
BLE01Ear Tag Reader	√
USB Cable for Charging	√
BLE01Ear Tag Reader Operators' Manual	√

Each item should be examined for any noticeable defects or damage that may have occurred during shipment although it is packed carefully. If any defect or damage exists, please contact to your local representative immediately to report the problem.

Key Board Functions

The handheld keyboard is multifunctional. In different modes, it has different functions.



1---Set button
2--- Enter button
3--Power/Scan button

Power/scan
Press the 'Power/Scan' button to power up the reader, the version of the software will be showed on the screen. Seconds after the reader turned on, the reader begins to scan.
The reader can be turned off by hold down the 'Power/Scan' button for seconds.
You can scan by pressing the 'Power/Scan' button and quit the scanning operation by pressing the 'Enter' button.
The device will shut down automatically in 15minutes, if you don't use it.

General Setting

Press the 'Set' button to enter the menu setting interface, there are 4 options you can choose (form 1). Press the 'Enter' button to choose the option (mark >), press the 'Enter' button to enter. Press the 'Power/Scan' button to return to the previous menu.

Form 1 menu setting

	Option	Description
1	language	The only choice is English, now.
2	Bluetooth	There are 3modes,'EMU KEB STD', 'EMU KBD SMART' and 'BLE PERIPHERAL'. You can press 'Set' button to select a mode, then press 'Enter' button to choose the mode (the device will indicate you 'waiting…' for set the parameter), at last there is a mark'*'before the current mode.
3	About	Show the device information, including the SN and the version of the soft.
4	Shut down	Press the 'Enter' button to power off the device.
Notes for Bluetooth: EMU KEB STD mode: shown the data from the reader and the cursor will jump to the next line. EMU KEB SMART mode: besides the functions of the EMU KEB STD, the keyboard will pop automatically for operator to add information. BLE PERIPHERAL mode: reserved for APP connection

Bluetooth connection
You can choose any equipment which has Bluetooth and Virtual keyboard (like Notes, excel, word etc) functions as your mobile terminal, like iPhone, ipad etc.

Open the Bluetooth function of the mobile terminal, and then connect our device 'Ear Tag Reader'.

Open the notes (for example), create a new or open an existing note, the blinking cursor notice that the equipment is ready for receiving data from the reader.

Scanning

1. Press the 'Power/Scan' button to detect (see figure4-1).
2. If there is no tag detected in 20 seconds, the information 'NO Tag' and' press the Power/Scan button to scan' will be shown on the screen(see figure 4-2). You can press the 'Power/Scan' button to detect again.
3. If a tag is detected, the tag number will be shown on the screen (see figure 4-3).
4. If the Bluetooth connection is well, the tag number will transmit to the mobile terminal automatically (see figure 4-4)

Company information
 Shenzhen A. N. G Technology Co., Ltd.

ANG is member of ICMA (International Card Manufacturer Association) and delivers outstanding quality that has been certified in accordance with CE FCC and RoHS certificates. 
 
Our Business Scales: PVC Card, Magnetic Stripe Card, RFID /NFC Card, Tag and Reader, BioPVC

To make sure NFC Sticker can be delivered without any damage, ANG uses top standard packaging. All Paper boxes and cartons are made of high-quality material. 
 
Packing details depend on the dimension of the NFC sticker.
 
If you're interested, just send me a inquire below !!! We will reply within 24 hours.Have a good day:)