High Frequency Animal Ear Tags , 13.56Mhz Waterproof Animal Rfid Tags
Using RFID animal tags has many advantages. One is that it offers another form of identification for each animal. Sometimes visual tags get lost, become snagged on a fence, etc, whereas RFID animal tags are small and are designed for high retention rates. Another plus is that an animal can more easily be identified (by scanning the tag with a reader) rather than needing to have the animal be completely still to read a visual tag or tattoo number. Scanning RFID animal tags rather than writing down it numbers is a tremendous benefit in saving time and minimizing errors.
Description:
1. Chip:EM4305
2. Frequency: 134.2Khz
3. User memory : 1K bytes
4. Protocol Standard: ISO14443A
5. HF Read range:0-5cm (Related to the chip ,antenna and reader)
6. Read/Write Endurance: 100,000 times
7. Operating Temperature :-20°C to + 55°C
| Brand Name |
A.N.G |
Material |
ABS |
| Dimension |
30mm or customize |
Item Type |
HF ABS Tag |
| Endurance |
100,000 times |
Color |
yellow |
| chip |
FM1108, MIFARE S50, etc… |
| Unit weight |
8g |
Product feature:
Material: ABS
Dimension: 30mm or customize
Unit weight: 8g
Color: Yellow
Depends on requirement
Applications:
1. Animal Identification
2. Animal traceability
3. Animal Monitoring
|
| dairy |
within 36 hours of birth |
up to 20 days from birth |
within 27 days of birth |
| beef |
up to 20 days from birth |
up to 20 days from birth |
within 27 days of birth |
| bison |
within 9 months of birth, or before weaning, whichever is sooner |
within 9 months of birth, or before weaning, whichever is sooner |
within 7 days of birth |
If an untagged animal dies before these deadlines you do not need to tag it, but you must record its date of birth and date of death against the dam number in your holding register.
What tags to use?
Each animal needs one primary and one secondary ear tag, both showing the same unique individual identification number.
The primary tag must be a yellow plastic distance-readable flag tag. It can go in either ear.
Each part of the primary tag shall only contain the information detailed below:
the logo
the country code
the herd mark
a six-digit individual animal number
Primary ear tag
The secondary tag must be in the other ear. It must have the same information as the primary tag, but may also contain management information. If you add extra management information, it should not affect or confuse the official identification information on the tag.
Secondary tags do not have to be the same as primary tags: they can be made of metal or plastic, and of a different size or style.
How to use?
1,First principle is to use an applicator with the appropriate ear tag.
2,Be sure that animal is restrained and the plier is clean.
3,The applicator should enable the operator to see the ear of an animal and should be ergonomic in order to allow applying an ear tag with a single move of the operator without an unnecessary effort.
4,The arms of the applicator may be parallel at the moment of closure, and the operator should feel the click sound.
5,The needle of the applicator provides the strength required to push the pin of the male part through the ear of the animal and into the female part. And this needle should be produced in stainless steel to exclude any risk of allergy or infection to operator and animal. When applied according to the instructions, the process of tag application has no harmful effect on the animal health.
6,Applicator producers such as A.N.G should supply replacement pins whenever needed
Packing:
100pcs/opp bag,1000pcs/box
Select Packaging according to purchase quantity.
Audited Supplier 
){kind=link}